GSM-Based Intrusion Detection and OTP Authentication Using PIR Sensing: An LED Prototype

Authors

  • Obiora Emeka Okoye Department of Physics with Electronics Technology, School of Science and Technology, Federal Polytechnic Oko, Nigeria https://orcid.org/0009-0007-7122-1942
  • Onyedikachi Fortune Nwandieze Department of Physics with Electronics Technology, School of Science Laboratory Technology, University of Port Harcourt River, Nigeria
  • Chinaza Desmond Nwajiobi Department of Physics with Electronics Technology, School of Science and Technology, Federal Polytechnic Oko, Nigeria https://orcid.org/0009-0001-0768-931X
  • Ernest Chidi Okoroafor Department of Physics with Electronics Technology, School of Science and Technology, Federal Polytechnic Oko, Nigeria
  • Chika Chibuzor Okwuma Department of Physics with Electronics Technology, School of Science and Technology, Federal Polytechnic Oko, Nigeria
  • Chinyere Perpetual Ezeuzo Department of Physics with Electronics Technology, School of Science and Technology, Federal Polytechnic Oko, Nigeria

DOI:

https://doi.org/10.38124/ijsrmt.v5i10.1753

Keywords:

Intrusion Detection, Passive Infrared Sensor, GSM Communication, One-Time Password, Arduino, LED Prototype

Abstract

In this study we describe the design and experimental evaluation of a GSM based intrusion detection and one time password (OTP) authentication prototype. An Arduino Uno controls an HC-SR501 passive infrared sensor, a SIM800L GSM module, a 4 x 4 keypad, a 16 x 2 I2C liquid-crystal display, a green indication LED and a buzzer. When motion is detected, the controller creates a 4-digit pseudo code and sends it to the predefined cellphone number via GSM module. The user enters the code on the keypad and presses the hash key to confirm. Correct and wrong answers have different visual and sound effects. Prototype tests revealed reliable sensing of motion within a range of 3–5 m, correct processing of all documented OTP test cases, and transmission of brief messages reliant on the network with an approximate 70% success rate among four Nigerian providers evaluated. These results demonstrate the viability of combining local sensing, GSM notification, and temporary code-based authentication in a low-cost LED prototype, and point to power stability, network coverage, and message latency as significant implementation obstacles.

Downloads

Download data is not yet available.

Downloads

Published

2026-11-14

How to Cite

Okoye, O. E., Nwandieze, O. F., Nwajiobi, C. D., Okoroafor, E. C., Okwuma, C. C., & Ezeuzo, C. P. (2026). GSM-Based Intrusion Detection and OTP Authentication Using PIR Sensing: An LED Prototype. International Journal of Scientific Research and Modern Technology, 5(10), 139–147. https://doi.org/10.38124/ijsrmt.v5i10.1753

PlumX Metrics takes 2–4 working days to display the details. As the paper receives citations, PlumX Metrics will update accordingly.

Similar Articles

<< < 17 18 19 20 21 22 23 24 25 26 > >> 

You may also start an advanced similarity search for this article.